We carry rebuild kits for the backflow preventers we see most and order anything else. Whether it's an RP dumping water, a double check that won't hold or a PVB leaking from the bonnet, we fix it, retest it and file the passing report.
- PriceFree quote
- Time1–2 hours
- RetestIncluded
- ApprovalPrice first
Want to get on the schedule? Call or book online.
Common fixes
- Relief valves that spit or dump
- Cracked test cocks
- Fouled or worn check seats
- Tired springs
- Leaking vacuum breaker caps
Fixing a reduced pressure assembly
When an RP starts leaking from the relief port, people often assume the relief valve is bad. Usually it's the first check. Grit or a hardened disc lets pressure build between the checks, and the relief valve opens to protect the supply.
The repair typically means cleaning the first check seat and installing new rubber parts. If the relief valve diaphragm has a tear or its seat is damaged, that gets rebuilt too.
We retest the whole assembly afterward and file the passing report. If water keeps discharging even after a rebuild, it can point to pressure swings in the supply, and we'll tell you what we think is going on.
Fixing a double check that won't hold
When a double check fails, it's nearly always a check valve that isn't sealing. The cause is usually debris or old rubber.
We shut the water off, open the check covers, pull each check out, and either clean it or rebuild it with a fresh kit. Weak springs get replaced. New o-rings go in before everything's reassembled.
On fire sprinkler services, taking a double check offline affects the fire system, so we plan the timing with you and keep it brief. After the repair, we test it again and send the passing report to your district.
Fixing vacuum breakers on sprinklers
PVBs and SVBs live outdoors in the sun and weather, so their rubber parts break down faster. The usual symptoms are water spitting from the top, a check that leaks and an air inlet that sticks open or closed.
A rebuild kit with a new disc, poppet and o-rings fixes most of these. A cracked bonnet gets swapped for a new one.
Repairs are typically fast, and we retest right away. For very old devices where parts are scarce, a new device can cost close to what a rebuild would, so we'll give you both prices.
Matching the right parts to your device
The devices we work on come from several major manufacturers, and each model uses specific parts. We stock kits for the most common ones and order anything else.
We stick with the manufacturer's parts for your exact make and model. Off-brand or mismatched parts can get a device to pass once and then fail again soon. We check the model and serial number before ordering.
If we need to order, we'll give you an arrival estimate and book the follow-up visit. Parts usually show up within a few days, and every repair ends with a retest and a filed report.
Signs your preventer needs attention
You don't always have to wait for a failed test to know something's wrong. Water dripping or spraying from an RP relief port, water spitting from the top of a PVB, a steady leak at a fitting, or a sudden drop in water pressure downstream are all signs worth a call.
Catching these early often means a simpler, cheaper repair than waiting until the device fails outright.
Fire sprinkler preventer repairs
Repairing a fire line device takes a bit more coordination. Shutting it down affects the sprinkler system, so the alarm company or building staff may need a heads-up.
We plan the work with you and keep the downtime short. These devices are often 4 inches or larger, and you'll get a quote before any work begins.
Booking a repair
Repairs often happen right after a failed test, on the same visit. If you need time to decide or get approval, we'll leave the quote with you and come back when you're ready.
Did someone else fail your device? Forward their report. The readings show us which parts to bring, which usually means a single visit.
Repair or replace
Usually yes. If the body is cracked or parts are gone, we'll go over replacement.
Questions
Which brands do you repair?
The common ones: Watts, Febco, Wilkins and Ames, plus most others we can get parts for.
How long do repairs last?
A good rebuild often lasts years. Debris in the water is the main thing that shortens it.
Is the relief valve always the problem when an RP leaks?
Usually not. Most of the time the first check is fouled or worn, and the relief valve is doing its job.
Do you use original parts?
Yes. We use the manufacturer's repair kits for your make and model.
Why does my preventer keep failing?
Debris in the line and age are the usual reasons. We'll tell you if replacing it makes more sense.
Do I need a new test after a repair?
Yes, and it's included. The district only accepts a passing test after the repair.
What to expect when you book backflow preventer repair
Booking takes a couple of minutes by phone or online. We confirm the address, the device and how to reach it, and we'll give you a time window that works for you. For most homes, you don't need to be there.
On the visit, a certified tester does the work with a calibrated gauge and explains anything that comes up in plain terms. If a repair is needed, you'll get the price before anything happens. When the device passes, we send the report to your water district and email you a copy. Our office is open seven days a week, 6am to 12pm, and emergency calls are answered around the clock.
Backflow Preventer Repair near Ontario
We offer backflow Preventer Repair throughout Ontario and nearby cities, including Upland, Montclair, Chino, Rancho Cucamonga and Pomona. Most appointments are available within the week, and you can call or book online.