Passing readings are only part of the story. During an inspection we check how the device is installed, whether it can drain and be accessed, and whether anything is worn, leaking or damaged.
- Price$105 flat
- TimeUnder an hour
- SchedulingSame week
- FilingIncluded
Want to get on the schedule? Call or book online.
What we look at
- Freeze and theft protection
- Shutoff valves and test cocks
- Leaks, cracks and corrosion
- Drainage under RP relief valves
- Clearance and access for testing
Inspection and testing are different things
Testing measures how the valves perform. Inspection looks at everything else: the condition of the device, how it was installed and whether it can be serviced and tested going forward.
It's possible for a device to pass every reading and still have issues. Leaks at the fittings, cracked test cocks, an RP installed below grade where it can't drain, or a device boxed in with no room to work are all common finds.
We inspect every device we test. If something looks off, we tell you what it is and whether it's urgent or just something to plan for.
Setup issues that cause trouble later
Some of the most common problems we see in Ontario come from how a device was installed in the first place. RP assemblies must stay above ground so their relief valve can drain; one sitting in a pit or a box that floods is a real concern.
Vacuum breakers need to be higher than every outlet they protect. On sloped yards, it's easy to end up with sprinkler heads uphill of the PVB, which defeats its purpose.
We also see devices installed backward, devices with no room around them for testing, and shutoff valves that won't close fully. None of these are rare, and most can be corrected. We'll explain what we found and what the fix would involve.
What we look for on an older device
Wear tends to show before a device fails outright. Mineral crust around joints means small leaks. A relief valve that drips now and then usually means the first check needs cleaning or new rubber. Rusted hardware can turn a simple repair into a bigger one later.
We check for cracks from freezing and dents or bends from mowers, cars and landscaping work. Missing test cock caps let in debris that can affect readings.
Brass theft is also common, especially near streets and parking lots. If yours is exposed, we might recommend a cage. You'll hear which items need attention right away and which can wait.
Times to ask for an inspection
We inspect on every test, but sometimes an inspection alone is what you need. Buyers of commercial properties often want one before closing. Managers taking over a new building like to know what's there.
Other good times include after a freeze, after nearby construction or landscaping, and after the device has been bumped or hit.
Give us a call and describe the situation. If the device is close to its due date, we'll usually combine the inspection with the annual test so you get both the report and the condition check in one trip.
Drainage and flooding risks
An RP's relief valve will dump water if a check fails. The question is where that water ends up. Indoors without a floor drain, it can damage the building. Outdoors, it can flood walkways or parking areas.
We check whether discharge has a safe path. If it doesn't, we'll suggest fixes such as an air gap drain or moving the device.
How we report what we found
We keep inspection notes brief and clear. For each item, you'll see what we found, why it matters and how urgent it is: now, soon or next year.
Repairs come with prices attached. We don't pad the list, so everything on it deserves a look. Managers frequently forward the notes to owners or boards as-is.
Inspection for buyers
Buying a commercial building, apartment complex or home with irrigation, pools or fire sprinklers? Backflow devices are easy to overlook during due diligence, and replacing several can add up.
An inspection before closing tells you how many devices there are, what shape they're in and whether any are the wrong type or due for replacement. That's useful when negotiating repairs or planning your first year's budget.
If something needs work
You get a plain explanation and a price if a repair is needed.
Questions
Can an inspection catch problems before a test fails?
Often, yes. Leaks, worn parts and bad drainage show up before the readings drop.
Does the inspection cost extra?
It's part of every test we do. Call if you need an inspection on its own.
Will an inspection fix the problems it finds?
No, but we'll explain each issue and give you a price for any repair.
Do you inspect devices you didn't install?
Yes. We inspect every device we test, no matter who put it in.
Is an inspection the same as a test?
No. The test measures how the valves perform. The inspection looks at the device's condition and setup. We do both on every visit.
Will you send me what you found?
Yes. Anything worth noting goes in writing with your report.
How we handle backflow inspection in Ontario
Our approach is simple. Show up when we say we will, do the work right, and handle the paperwork so you don't have to. Every tester is certified, every gauge is kept in calibration, and filing with your water district is included.
Pricing is clear. Tests are a flat $105 for devices under 4 inches and $175 for 4 inches and larger, and anything beyond the test is quoted before we start. We're available seven days a week from 6am to 12pm, with emergency calls answered 24/7. Most Ontario appointments are within the same week, and you'll have a copy of your report by email when we're done.
Backflow Inspection near Ontario
We offer backflow Inspection throughout Ontario and nearby cities, including Upland, Montclair, Chino, Rancho Cucamonga and Pomona. Most appointments are available within the week, and you can call or book online.