Cross-Connection Inspection in Ontario

We check where your plumbing could let contaminated water back into the public supply.

A cross-connection is any point where drinking water could mix with something it shouldn't, like a hose in a chemical tank or an irrigation line with fertilizer injection. A cross-connection inspection walks the property, finds those points, and checks whether each one is protected.

  • PriceFree quote
  • ReportWritten list
  • Best forCommercial sites
  • Follow-upInstall if needed

Pricing

Backflow sizeFlat fee per backflow
Under 4"$105
4" and larger$175

Includes the test and filing with your water district. No hidden fees.

Want to get on the schedule? Call or book online.

Common places we check

  • Commercial kitchens and dish machines
  • Irrigation and fertilizer injection systems
  • Hose connections and utility sinks
  • Medical and dental equipment
  • Boilers, chillers and cooling towers

Understanding cross-connections

A cross-connection is any point where drinking water could come into contact with something that shouldn't be in it. It might be a hose sitting in a bucket of cleaning solution, an irrigation system with a fertilizer injector, a boiler with treatment chemicals, or a dental chair's water line.

Normally water flows one way, from the main into your building. But if pressure drops on the street side, say from a main break or a fire hydrant being opened, water can be pulled backward. That's called backsiphonage. If pressure on your side rises above the supply pressure, from a pump or a boiler, water can be pushed backward. That's backpressure.

Either way, contaminated water can end up in the supply. Backflow protection exists to stop that at every cross-connection.

How the inspection works

We start at the meter and follow the water through the property. Along the way we check irrigation, mechanical and boiler rooms, kitchens, labs, wash bays, hose connections and any equipment tied to the water lines.

Each connection gets noted: what it serves, how risky it is and whether it's protected. Existing devices are checked to see if they match the hazard. Unprotected connections get a recommendation.

You get a written summary afterward. Since water districts set their own rules for formal surveys, and some require a cross-connection control specialist, let us know what your district asked for and we'll make sure the work matches.

Who usually needs one

Water districts typically ask for cross-connection inspections at commercial, industrial, medical and multi-unit properties. In Ontario, that includes restaurants, medical and dental offices, car washes, manufacturing sites, schools, hotels and apartment complexes.

A change of use often triggers a survey too. If a retail space becomes a restaurant, or an office becomes a clinic, the hazard level changes and the district may want the property reviewed.

Some owners ask for one on their own, to understand what's on site before an audit, a purchase or a remodel. If your district has sent a letter, the letter usually explains what they need and by when. Send us a copy and we'll take it from there.

Matching protection to what we find

Protection depends on the hazard. An air gap, an open space between the outlet and what it fills, is the strongest option. For high hazards where an air gap won't work, an RP assembly is the standard.

Lower hazards may be fine with a double check. Connections only at risk of backsiphonage, such as many irrigation systems, can sometimes use a PVB or SVB if the layout fits.

The district decides what's acceptable for each situation. After the inspection, we can quote the needed devices, install them, test them and file the first reports, all in one plan.

What we typically find

Each kind of business has its own usual suspects. Restaurants often have soda systems, dish machines and hose connections with chemical dispensers. Medical and dental offices have equipment lines and sterilizers. Car washes have chemical injection. Manufacturing sites can have process water, cooling systems and tanks.

Knowing the usual hazards helps the inspection go quickly, but we still check every connection, since unusual setups are common.

Testing new devices after the survey

New devices added after a survey each need a startup test. The reports show your district the connections are protected.

After that, they're tested every year like any other device. We can track all the new due dates for you if you'd like.

Pricing a cross-connection inspection

Pricing depends on the size of the property and how many water connections it has. A small storefront is a quick walk-through, while a multi-building campus takes much longer.

Call with the address, the type of business and any letter from your district. We'll give you a free quote before scheduling.

After the inspection

We'll show you what needs protection and quote the installation.

Questions

Do homes ever need one?

Rarely, but it can come up with wells, pools or home businesses. Call if your district asked.

Who needs a cross-connection inspection?

Usually commercial, industrial, medical and multi-unit properties, or any site your water district asks to be surveyed.

Is this the same as a backflow test?

No. A test checks a device that's already installed. A cross-connection inspection checks whether you have the devices you need.

How long does a cross-connection inspection take?

A small commercial space may take an hour. Larger sites with several buildings take longer, and we'll estimate when you call.

What happens with what you find?

You get a list of each connection and what it needs. You decide what to fix and when.

Does my district require this?

Some do for commercial and multi-unit sites, especially after a change of use. Check your letter or ask us.

What to expect when you book cross-connection inspection

Booking takes a couple of minutes by phone or online. We confirm the address, the device and how to reach it, and we'll give you a time window that works for you. For most homes, you don't need to be there.

On the visit, a certified tester does the work with a calibrated gauge and explains anything that comes up in plain terms. If a repair is needed, you'll get the price before anything happens. When the device passes, we send the report to your water district and email you a copy. Our office is open seven days a week, 6am to 12pm, and emergency calls are answered around the clock.

Cross-Connection Inspection near Ontario

We offer cross-Connection Inspection throughout Ontario and nearby cities, including Upland, Montclair, Chino, Rancho Cucamonga and Pomona. Most appointments are available within the week, and you can call or book online.

Have a notice from your district?

Same-week appointments. We handle the paperwork.

Call NowSchedule